Electric Cartridges

1. Electronic controls are easy to access under the lid.

2. Automatic control, standard: Thermostat, overheat protection, operational indicator, built-in breaker and time delay (not K-060).

3. Compact dimensions

4. . Factory connected power simplifies and reduces
installation costs.

5. Small water volume and well-insulated container ensures low heat loss.

If your water heater is not prepared for an electric element you can connect an electric cartridge instead. An electric cartridge is basically an electric element mounted in a water container, or an electric boiler without a hot water heater.

It is easy to install an electric cartridge to the boiler via an expansion pipe and docking socket or draining tap. A circulation pump should be installed to ensure water circulation.

Electric cartridge K-060
K-060 is an insulated container for electric elements. All electric elements with R50 connection and maximum plug-in length of 420mm can be mounted in the container giving an output of 1.5kW to 9kW.

Electric cartridge EK 13
EK 13 has a total output of 13kW, divided into three steps (6+4+3kW). Built-in time delay and fused socket for a circulation pump.

Electric cartridge EK 15 E
EK 15 has a total output of 14.7kW, divided into seven steps (7+2,1kW). Built-in time delay and fused socket for a circulation pump.

Electric boilers 26-300kW.
For greater output than 15kW, we have a wide assortment of electric boilers in the 26 to 300kW range.